Happy Thanksgiving from Bailiff Enterprises! Our office and plant will be closed Thursday, November 26 and Friday, November 27, 2026. We reopen Monday, November 30.

← PVDF Insulated Double Wall tanks

Insulated 300 Gallon PVDF Double Wall Vertical Tank 1.9 SG 48 in. Dia.

Molded from genuine Kynar® PVDF.

Part # PVDF-VTBDC300-48-19-NAT-INS

  • Capacity300 gallons
  • Diameter48"
  • Height78"
  • Specific gravity1.9

Price

$101,334.18

Includes insulation of the sides and top.

Tank Specifications

Capacity
300 gallons
Dimensions
48" Diameter × 78" Height (4 ft × 6 ft 6 in)
Specific Gravity
1.9
Color
White
Tank Type
Vertical
Wall
Double Wall
Installation
Above-ground tank. Do not install below grade.
Lid
8"
Resin
PVDF
Manufacturer
Bailiff
Weight
365 lbs
  • All tanks go through Hydrostatic Testing before release.
  • 2" Closed-Cell Polyurethane Spray Foam Insulation on the Sides and Top
  • White Elastomeric Coating over the Insulation
  • Insulation Rated R-6.7 per Inch of Thickness
  • FDA Approved Resin
  • Naturally Resistant to UV and Weathering
  • Rated for Atmospheric Pressure Only
  • Lifting/Tie-Down Lugs Molded-In

3D View

Drag to rotate, scroll or pinch to zoom. Shows the standard tank without fittings or options. The model is for reference, and small differences from the finished tank are possible. See the tank drawing for dimensions.

Available Fittings and Options

We outfit tanks to customer specifications.

See all fittings and options →

Manufacturer Information

Manufacturer
Bailiff
Part Number
PVDF-VTBDC300-48-19-NAT-INS
Warranty
Limited 3-Year Warranty

Resin Information

Resin
PVDF
Color
White
Temperature
PVDF has a maximum continuous use temperature of 275 F for some applications. for some applications.
Chemical Compatibility
Chemical Compatibility Database

Shipping Information

Ship Width
48"
Ship Length
48"
Ship Height
84"
Ship Weight
 
Ship Class
 

About Insulated Tanks

Insulated tanks are covered with closed-cell polyurethane spray foam, rated R-6.7 per inch, and sealed with a white elastomeric coating that protects the foam from UV. Kynar PVDF resists aggressive chemicals and suits ultra-clean applications.

  • Standard insulation is 2 inches thick (R-13.4); 3 inch (R-20.1) and 4 inch (R-26.8) are available on request.
  • The sides and top of the tank are insulated.
  • A good fit for freeze protection and for chemicals that crystallize or gel in cold weather, such as 50% sodium hydroxide and DEF.
  • Heat tracing can be added when insulation alone is not enough.

Frequently Asked Questions

How thick is the insulation?

Standard insulation is 2 inches of closed-cell polyurethane foam (R-13.4). We also offer 3 inch (R-20.1) and 4 inch (R-26.8) on request.

When do I need an insulated tank?

Use an insulated tank for freeze protection and for chemicals that crystallize or gel in cold weather, such as 50% sodium hydroxide and DEF (diesel exhaust fluid).

Can heat tracing be added?

Yes. We offer heat tracing in combination with the insulation when insulation alone is not enough.

What do the 1.5, 1.9 and 2.2 SG ratings mean?

The SG (specific gravity) rating is the heaviest liquid a tank is built to hold. Water is 1.0. Tanks rated 1.5 SG are for liquids up to 12.5 pounds per gallon, 1.9 SG up to 15.8 pounds per gallon and 2.2 SG up to 18.3 pounds per gallon. Choose a rating at or above the specific gravity of your liquid. See our specific gravity chart.

When you need to stabilize the contents of your tank to maintain a temperature or prevent freezing, our insulated tanks can be the answer.  

Insulation can be combined with Heat Trace to keep tank contents at a pre-set minimum temperature.  This is especially beneficial for chemicals like Sodium Hydroxide (Caustic Soda) where the liquid becomes viscous and hard to pump at temperatures below 65 F.