120 Gallon HDPE Vertical Tank 1.5 38
Part # HDPE-VTN00120-38-1.5-NAT
Tank Specifications
- Capacity
- 120 gallons
- Dimensions
- 38" Diameter × 31" Height (3 ft 2 in × 2 ft 7 in)
- Specific Gravity
- 1.5
- Color
- Translucent White
- Tank Type
- Vertical
- Wall
- Single Wall
- Installation
- Above-ground tank. Do not install below grade.
- Lid
- 5"
- Resin
- HDPE
- Manufacturer
- Norwesco
- Weight
- 42 lbs
- FDA approved resin for food grade/potable water applications
- Complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2
- Infused with UV Inhibitors to Prolong the Life of This Tank
- Rated for Atmospheric Pressure Only
- Lifting/Tie-Down Lugs Molded-In
Available Fittings and Options
We outfit tanks to customer specifications.
Manufacturer Information
- Manufacturer
- Norwesco
- Part Number
- HDPE-VTN00120-38-1.5-NAT
- Warranty
- Limited 3-Year Warranty
Resin Information
- Resin
- HDPE
- Color
- Translucent White
- Temperature
- HDPE has a maximum continuous use temperature of 120 F.
- Chemical Compatibility
- Chemical Compatibility Database
Shipping Information
- Ship Width
- 38"
- Ship Length
- 38"
- Ship Height
- 37"
- Ship Weight
- Ship Class
About Vertical Storage Tanks
Vertical tanks are the most popular plastic storage tank: the most efficient shape to mold and the lowest cost per gallon stored. HDPE handles a wide range of acids, caustics and water-based chemicals and is the most economical resin.
- Molded as one seamless piece, with no welds or seams to fail.
- Fittings, level indicators and tie-downs are installed before the tank ships.
Frequently Asked Questions
What do the 1.5, 1.9 and 2.2 SG ratings mean?
The SG (specific gravity) rating is the heaviest liquid a tank is built to hold. Water is 1.0. Tanks rated 1.5 SG are for liquids up to 12.5 pounds per gallon, 1.9 SG up to 15.8 pounds per gallon and 2.2 SG up to 18.3 pounds per gallon. Choose a rating at or above the specific gravity of your liquid. See our specific gravity chart.
Can fittings be installed before the tank ships?
Yes. We outfit tanks to your specifications, with bulkheads, welded flanges and couplings, vents and valves, level indicators and tie-downs installed at our plant.
Will this tank work with my chemical?
Check your chemical in our chemical compatibility database, or tell us the chemical, concentration and temperature when you request a quote and we will confirm the right resin and SG rating.
Chemicals this HDPE tank is rated for
Common chemicals rated Good or Excellent for HDPE. Each page shows tank, fitting and gasket ratings.
- Sodium Hypochlorite (100%)
- SULFURIC ACID 1% to 10%
- Hydrochloric Acid 37%
- Sodium Hydroxide (50%)
- Ferric Chloride
- Phosphoric Acid (>40%)
- Aluminum Sulfate
- Hydrofluosilicic Acid (20%)
- Acetic Acid
- Diesel Exhaust Fluid (DEF)
- Ethylene Glycol
- Calcium Chloride (Saturate)
- Citric Acid
- Hydrogen Peroxide H2O2 (50%)
See the full chemical compatibility chart for every chemical, fitting and gasket rating.
Outfit this tank
Fittings & Options for This Tank
We install fittings and accessories at our plant so your tank arrives ready for your piping and controls. See all fittings & options.
Welded couplings and flanges, bulkheads, bolted and PVC bulkhead flanges, sanitary tri-clamps.
View →Vents, Valves & PipingPVC U-vents, ball and check valves, top fill and top drain lines.
View →Level IndicatorsReverse float gauges and ultrasonic level sensors with display.
View →Tank Options & AccessoriesTie-downs, leak detection, insulation, heat trace, ladders and cages.
View →