8 Gallon HDPE Rectangular Tank 1.9 SG
Part # HDPE-RTB00008-16-1.9-NAT
Price
$95.00
Installing this tank? Read our rectangular tank installation steps: base, tie-downs, venting and the water test.
Rectangular Tank Specifications
- Capacity
- 8 gallons
- Dimensions
- 16" Length × 12" Width × 10" Height (1 ft 4 in × 1 ft × 10 in)
- Specific Gravity
- 1.9
- Color
- Translucent White
- Type
- Rectangular Tank
- Wall
- Single Wall
- Installation
- Above-ground tank. Do not install below grade.
- Lid
- 8"
- Resin
- HDPE
- Manufacturer
- Bailiff
- Every Tank Undergoes Hydrostatic Testing Before Release
- FDA approved resin for food grade/potable water applications
- Complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2
- Infused with UV Inhibitors to Prolong the Life of This Tank
- Rated for Atmospheric Pressure Only
Available Fittings and Options
We outfit tanks to customer specifications.
- Heat Tracing
- Top Fill Lines
- U-Vents
- Bulkheads – PVC & CPVC (threaded or socket/glued), Polypropylene & Stainless Steel (threaded)
- Self-Aligning Bulkheads
- Ladders – OSHA Compliant
- Ultrasonic Level Sensors
- Reverse Float Level Indicators
- Wind/Seismic Tie-Down Systems
- Valves – Ball, True-Union, Check, Foot
- Welded Flanges – ANSI #150
- Welded Couplings
- Sanitary Tri-Clamps
- Bolted Manways
- Lids – Vented/Unvented
- Bolted Flanges
- Sight Glass
- FDC Adapters
Manufacturer Information
- Manufacturer
- Bailiff
- Part Number
- HDPE-RTB00008-16-1.9-NAT
- Warranty
- Limited 3-Year Warranty
Resin Information
- Resin
- HDPE
- Color
- Translucent White
- Temperature
- HDPE has a maximum continuous use temperature of 120 F.
- Chemical Compatibility
- Chemical Compatibility Database
Shipping Information
- Ship Width
- 0"
- Ship Length
- 0"
- Ship Height
- 16"
- Ship Weight
- Ship Class
About Rectangular Tanks
Compact rectangular tanks make the most of tight floor space and fit neatly against walls. HDPE handles a wide range of acids, caustics and water-based chemicals and is the most economical resin.
- Fits flat against walls and into tight footprints.
- Rotationally molded as a single piece, with no welds or seams to fail.
- Fittings are installed to your specifications before the tank ships.
Frequently Asked Questions
When should I choose a rectangular tank?
Choose a rectangular tank when floor space is tight or the tank needs to sit flat against a wall, where a round tank would waste space.
What do the 1.5, 1.9 and 2.2 SG ratings mean?
The SG (specific gravity) rating is the heaviest liquid a tank is built to hold. Water is 1.0. Tanks rated 1.5 SG are for liquids up to 12.5 pounds per gallon, 1.9 SG up to 15.8 pounds per gallon and 2.2 SG up to 18.3 pounds per gallon. Choose a rating at or above the specific gravity of your liquid. See our specific gravity chart.
Will this tank work with my chemical?
Check your chemical in our chemical compatibility database, or tell us the chemical, concentration and temperature when you request a quote and we will confirm the right resin and SG rating.
Chemicals this HDPE tank is rated for
Common chemicals rated Good or Excellent for HDPE. Each page shows tank, fitting and gasket ratings.
- Sodium Hypochlorite (100%)
- SULFURIC ACID 1% to 10%
- Hydrochloric Acid 37%
- Sodium Hydroxide (50%)
- Ferric Chloride
- Phosphoric Acid (>40%)
- Aluminum Sulfate
- Hydrofluosilicic Acid (20%)
- Acetic Acid
- Diesel Exhaust Fluid (DEF)
- Ethylene Glycol
- Calcium Chloride (Saturate)
- Citric Acid
- Hydrogen Peroxide H2O2 (50%)
See the full chemical compatibility chart for every chemical, fitting and gasket rating.
Outfit this tank
Fittings & Options for This Tank
We install fittings and accessories at our plant so your tank arrives ready for your piping and controls. See all fittings & options.
Welded couplings and flanges, bulkheads, bolted and PVC bulkhead flanges, sanitary tri-clamps.
View →Vents, Valves & PipingPVC U-vents, ball and check valves, top fill and top drain lines.
View →Level IndicatorsReverse float gauges and ultrasonic level sensors with display.
View →Tank Options & AccessoriesTie-downs, leak detection, insulation, heat trace, ladders and cages.
View →