100 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG
Part # HDPE-OTCB00100-36-1.9-NAT
Price
$369.00
Installing this tank? Read our open top cone bottom installation steps: base, tie-downs, venting and the water test.
Open-Top Cone Bottom Tank Specifications
- Capacity
- 100 gallons
- Dimensions
- 36" Diameter × 38" Height (3 ft × 3 ft 2 in)
- Specific Gravity
- 1.9
- Color
- Translucent White
- Type
- Open-Top Cone Bottom Tank
- Wall
- Single Wall
- Installation
- Above-ground tank. Do not install below grade.
- Lid
- 0"
- Resin
- HDPE
- Manufacturer
- Bailiff
- Weight
- 45 lbs
- Every Tank Undergoes Hydrostatic Testing Before Release
- FDA approved resin for food grade/potable water applications
- Complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2
- Infused with UV Inhibitors to Prolong the Life of This Tank
- Rated for Atmospheric Pressure Only
- Lifting/Tie-Down Lugs Molded-In
- Metal stand available, sold separately: powder-coated steel or stainless steel
3D View
Drag to rotate, scroll or pinch to zoom. Shows the standard tank without fittings or options. The model is for reference, and small differences from the finished tank are possible. See the tank drawing for dimensions.
Available Fittings and Options
We outfit tanks to customer specifications.
- Heat Tracing
- Top Fill Lines
- U-Vents
- Bulkheads – PVC & CPVC (threaded or socket/glued), Polypropylene & Stainless Steel (threaded)
- Self-Aligning Bulkheads
- Ladders – OSHA Compliant
- Ultrasonic Level Sensors
- Reverse Float Level Indicators
- Wind/Seismic Tie-Down Systems
- Valves – Ball, True-Union, Check, Foot
- Welded Flanges – ANSI #150
- Welded Couplings
- Sanitary Tri-Clamps
- 'Shoebox Fit' Removable Lids (optional, extra charge)
- Cone Bottom Stands (sold separately)
- Bolted Flanges
- Sight Glass
- FDC Adapters
Manufacturer Information
- Manufacturer
- Bailiff
- Part Number
- HDPE-OTCB00100-36-1.9-NAT
- Warranty
- Limited 3-Year Warranty
Resin Information
- Resin
- HDPE
- Color
- Translucent White
- Temperature
- HDPE has a maximum continuous use temperature of 120 F.
- Chemical Compatibility
- Chemical Compatibility Database
Shipping Information
- Ship Width
- 36"
- Ship Length
- 36"
- Ship Height
- 44"
- Ship Weight
- Ship Class
About Open Top Cone Bottom Tanks
An open top makes mixing, batching and cleaning easy, and the cone bottom drains completely. HDPE handles a wide range of acids, caustics and water-based chemicals and is the most economical resin.
- The open top gives full access for mixing, batching and cleaning.
- The cone bottom empties fully through the outlet.
- Lids are optional at an extra charge, and stands are sold separately.
- Rotationally molded as a single piece, with no welds or seams to fail.
Frequently Asked Questions
Is a lid included?
No. Lids are optional and carry an extra charge, so you can choose whether the tank stays open for mixing or is covered. Ask for the matching lid when you request a quote.
Does it need a stand?
Yes. Like all cone bottom tanks, it sits in a stand that supports the cone and leaves room for the outlet. Stands are sold separately.
What do the 1.5, 1.9 and 2.2 SG ratings mean?
The SG (specific gravity) rating is the heaviest liquid a tank is built to hold. Water is 1.0. Tanks rated 1.5 SG are for liquids up to 12.5 pounds per gallon, 1.9 SG up to 15.8 pounds per gallon and 2.2 SG up to 18.3 pounds per gallon. Choose a rating at or above the specific gravity of your liquid. See our specific gravity chart.
Will this tank work with my chemical?
Check your chemical in our chemical compatibility database, or tell us the chemical, concentration and temperature when you request a quote and we will confirm the right resin and SG rating.
Chemicals this HDPE tank is rated for
Common chemicals rated Good or Excellent for HDPE. Each page shows tank, fitting and gasket ratings.
- Sodium Hypochlorite (100%)
- SULFURIC ACID 1% to 10%
- Hydrochloric Acid 37%
- Sodium Hydroxide (50%)
- Ferric Chloride
- Phosphoric Acid (>40%)
- Aluminum Sulfate
- Hydrofluosilicic Acid (20%)
- Acetic Acid
- Diesel Exhaust Fluid (DEF)
- Ethylene Glycol
- Calcium Chloride (Saturate)
- Citric Acid
- Hydrogen Peroxide H2O2 (50%)
See the full chemical compatibility chart for every chemical, fitting and gasket rating.
Outfit this tank
Fittings & Options for This Tank
We install fittings and accessories at our plant so your tank arrives ready for your piping and controls. See all fittings & options.
Welded couplings and flanges, bulkheads, bolted and PVC bulkhead flanges, sanitary tri-clamps.
View →Vents, Valves & PipingPVC U-vents, ball and check valves, top fill and top drain lines.
View →Level IndicatorsReverse float gauges and ultrasonic level sensors with display.
View →Tank Options & AccessoriesTie-downs, leak detection, insulation, heat trace, ladders and cages.
View →