Request a Quote

1,000 Gallon HDPE Closed Top Cone Bottom Tank 1.9 SG

Part # HDPE-CBTB01000-70-1.9-NAT

Price

$1,399.00

Request a Quote Tank Drawing

Cone Bottom Tank Specifications

Capacity
1,000 gallons
Dimensions
70" Diameter × 92" Height (5 ft 10 in × 7 ft 8 in)
Specific Gravity
1.9
Color
Translucent White
Type
Cone Bottom Tank
Wall
Single Wall
Installation
Above-ground tank. Do not install below grade.
Lid
16"
Resin
HDPE
Manufacturer
Bailiff
Weight
275 lbs
  • Every Tank Undergoes Hydrostatic Testing Before Release
  • FDA approved resin for food grade/potable water applications
  • Complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2
  • Infused with UV Inhibitors to Prolong the Life of This Tank
  • Rated for Atmospheric Pressure Only
  • Lifting/Tie-Down Lugs Molded-In
  • Metal stand available, sold separately: powder-coated steel or stainless steel

Available Fittings and Options

We outfit tanks to customer specifications.

Manufacturer Information

Manufacturer
Bailiff
Part Number
HDPE-CBTB01000-70-1.9-NAT
Warranty
Limited 3-Year Warranty

Resin Information

Resin
HDPE
Color
Translucent White
Temperature
HDPE has a maximum continuous use temperature of 120 F.
Chemical Compatibility
Chemical Compatibility Database

Shipping Information

Ship Width
0"
Ship Length
0"
Ship Height
0"
Ship Weight
 
Ship Class
 

About Cone Bottom Tanks

Cone bottom tanks drain completely through the bottom outlet, making them ideal for mixes, slurries and batch processes. HDPE handles a wide range of acids, caustics and water-based chemicals and is the most economical resin.

  • The cone empties fully through the outlet, with nothing left behind.
  • Several cone angles are offered, such as 15, 30 and 45 degrees.
  • Cone bottom tanks sit in a stand that supports the cone and raises the outlet for draining. Stands are sold separately.
  • Rotationally molded as a single piece, with no welds or seams to fail.

Frequently Asked Questions

Why choose a cone bottom tank?

Choose a cone bottom when you need to drain a tank completely, for example with slurries, mixes or batch processes where product must not be left in the bottom.

Does a cone bottom tank need a stand?

Yes. A cone bottom tank sits in a stand that supports the cone and leaves room for the outlet piping. Stands are sold separately; ask us for the stand that fits this tank when you request a quote.

What do the 1.5, 1.9 and 2.2 SG ratings mean?

The SG (specific gravity) rating is the heaviest liquid a tank is built to hold. Water is 1.0. Tanks rated 1.5 SG are for liquids up to 12.5 pounds per gallon, 1.9 SG up to 15.8 pounds per gallon and 2.2 SG up to 18.3 pounds per gallon. Choose a rating at or above the specific gravity of your liquid. See our specific gravity chart.

Will this tank work with my chemical?

Check your chemical in our chemical compatibility database, or tell us the chemical, concentration and temperature when you request a quote and we will confirm the right resin and SG rating.

Chemicals this HDPE tank is rated for

Common chemicals rated Good or Excellent for HDPE. Each page shows tank, fitting and gasket ratings.

See the full chemical compatibility chart for every chemical, fitting and gasket rating.

Outfit this tank

Fittings & Options for This Tank

We install fittings and accessories at our plant so your tank arrives ready for your piping and controls. See all fittings & options.

Pipe Connection Fittings

Welded couplings and flanges, bulkheads, bolted and PVC bulkhead flanges, sanitary tri-clamps.

View →Vents, Valves & Piping

PVC U-vents, ball and check valves, top fill and top drain lines.

View →Level Indicators

Reverse float gauges and ultrasonic level sensors with display.

View →Tank Options & Accessories

Tie-downs, leak detection, insulation, heat trace, ladders and cages.

View →