← Polypropylene Insulated tanks
Insulated 300 Gallon Polypropylene Vertical Tank - 35
Part # PP-VTB00300-35-1.9-NAT-INS
Tank Specifications
- Capacity
- 300 gallons
- Dimensions
- 35" Diameter × 78" Height (2 ft 11 in × 6 ft 6 in)
- Specific Gravity
- 1.9
- Color
- White
- Tank Type
- Vertical
- Wall
- Single Wall
- Installation
- Above-ground tank. Do not install below grade.
- Lid
- 16"
- Resin
- Polypropylene
- Manufacturer
- Bailiff
- Weight
- 90 lbs
- Meets or Exceeds ASTM D 1998-21 Wall Thickness Specifications.
- All tanks go through Hydrostatic Testing before release.
- 2" Closed-Cell Polyurethane Spray Foam Insulation on the Sides and Top
- White Elastomeric Coating over the Insulation
- Insulation Rated R-6.7 per Inch of Thickness
- FDA Approved Resin
- Infused with UV Inhibitors to Prolong the Life of This Tank
- Rated for Atmospheric Pressure Only
- Lifting/Tie-Down Lugs Molded-In
Available Fittings and Options
We outfit tanks to customer specifications.
Manufacturer Information
- Manufacturer
- Bailiff
- Part Number
- PP-VTB00300-35-1.9-NAT-INS
- Warranty
- Limited 3-Year Warranty
Resin Information
- Resin
- Polypropylene
- Color
- White
- Temperature
- Polypropylene has a maximum continuous use temperature of 200 F.
- Chemical Compatibility
- Chemical Compatibility Database
Shipping Information
- Ship Width
- 37"
- Ship Length
- 37"
- Ship Height
- 84"
- Ship Weight
- 160 lbs
- Ship Class
- 250
When you need to stabilize the contents of your tank to maintain a temperature or prevent freezing, our insulated tanks can be the answer.
Insulation can be combined with Heat Trace to keep tank contents at a pre-set minimum temperature. This is especially beneficial for chemicals like Sodium Hydroxide (Caustic Soda) where the liquid becomes viscous and hard to pump at temperatures below 65 F.