Tank Specifications

Capacity: 10,000 gallons
Dimensions: 141" Diameter × 202" Height (11 ft 9 in × 16 ft 10 in)
Specific Gravity: 1.5
Color: White
Tank Type: Vertical
Wall: Double Wall
Installation: Above-ground tank. Do not install below grade.
Lid: 24"
Resin: HDPE
Manufacturer: Bailiff
Weight: 4,250 lbs

Meets or Exceeds ASTM D 1998-21 Wall Thickness Specifications.
All tanks go through Hydrostatic Testing before release.
2" Closed-Cell Polyurethane Spray Foam Insulation on the Sides and Top
White Elastomeric Coating over the Insulation
Insulation Rated R-6.7 per Inch of Thickness
FDA Approved Resin
Infused with UV Inhibitors to Prolong the Life of This Tank
Rated for Atmospheric Pressure Only
Lifting/Tie-Down Lugs Molded-In

Available Fittings and Options

We outfit tanks to customer specifications.

Heat Tracing
Top Fill Lines
U-Vents
Threaded Bulkheads – PVC, CPVC, Polypropylene, Stainless Steel
Self-Aligning Bulkheads
Ladders – OSHA Compliant
Interstitial Leak Detectors
Ultrasonic Level Sensors
Reverse Float Level Indicators
Wind/Seismic Tie-Down Systems
Valves – Ball, True-Union, Check, Foot
Welded Flanges – ANSI #150
Welded Couplings
Sanitary Tri-Clamps
Bolted Manways
Lids – Vented/Unvented
Bolted Flanges
Sight Glass
FDC Adapters

Manufacturer Information

Manufacturer: Bailiff
Part Number: HDPE-VTBDC10500-142-1.5-NAT-INS
Warranty: Limited 3-Year Warranty

Resin Information

Resin: HDPE
Color: White
Temperature: HDPE has a maximum continuous use temperature of 120 F.
Chemical Compatibility: Chemical Compatibility Database

Shipping Information

Ship Width: 0"
Ship Length: 0"
Ship Height: 0"
Ship Weight
Ship Class

When you need to stabilize the contents of your tank to maintain a temperature or prevent freezing, our insulated tanks can be the answer.

Insulation can be combined with Heat Trace to keep tank contents at a pre-set minimum temperature. This is especially beneficial for chemicals like Sodium Hydroxide (Caustic Soda) where the liquid becomes viscous and hard to pump at temperatures below 65 F.